Mold Release Agent

Product Details:

We offer a wide range of Dexkote 7 X Semi Permanent Mold Release Agents.

Product Details

We offer a wide range of Dexkote 7 X Semi Permanent Mold Release Agents.

Products Details

 

• Mold surface must be thoroughly cleaned to remove all traces of wax, release agents, any previous build up and other sealers. For this we recommend Dexclean Mold Cleaner.

• Surface should be dry and free of all contaminants.

• Seal mold with Dexseal Sealer (See Dexseal Sealer Technical Data Sheet for details.)

• Saturate clean cotton cloth (not dripping) with Dexkote 7 X Mold Release and wipe on a smooth continuous film of no more than a few square feet at a time.

• Wait until the Dexkote 7 X film starts to evaporate (approx. 3-20 seconds) and while film is still wet, wipe the surface with a second clean dry cotton cloth using a circular motion from the outside working inward until the film is left dry and clear. A cold mold surface may require a longer waiting period before wiping off excess material.

• Repeat above procedures until entire mold surface has been covered. Usually, 4-5 coats, allowing 10 minutes gap in between, are necessary.

• Allow to cure for 20-30 minutes at room temp. or for 10 minutes at 200 DegreeF finally.

MOQ 1 One US Gallon

Product Details:

Our customers can choose from a wide collection of industrial Tag Mold Release Agents.

Product Details:

Our customers can choose from a wide collection
of industrial Tag Mold Release Agents.

Specification:

• Type: Solvent or water based Release Agents,

• Purity: 99.9%

• Multi Release/Semi permanent,

• No build up on the moulds,

• Temperature Stability of 850 DegreeF / 450 DegreeC

Request

Product Details:

We are known for offering various superior quality Non Silicone Mold Release Agents. These agents are used in the industry sectors like Plastics, Rubber, Composites, PU, laminates, casting and others.

Product Details:

We are well known for offering various superior quality Non Silicone Mold Release Agents. These agents are used in the molding industry sectors like Rubber, composites, PU, Plastics and others.

Specification:

• Type: Solvent or water based Release Agents,

• Purity: 99.9%

• Multi Release/Semi permanent,

• No build up on the moulds,

• Temperature Stability of 850°F / 450°C

MOQ 1 One US Gallon

 

 

Additional Information:

• Delivery Time: 2-7 DAYS

Product Details:

We are widely appreciated for offering our clients with various Water BasedMold Release Agent for different end use.


Specification:

• Multi Release/Semi permanent,

• No/very little build up on the moulds,

• Temperature Stability of 850 DegreeF / 450 DegreeC

Product Details:

TM 112 Mold Release Agent  is designed to provide the easy part release for difficult, abrasive molding, specially useful for brake lining/brake shoes.

Product Details

TM 112 Mold Release Agent is designed to provide the easy part release for difficult, abrasive molding.

Applications

• Filament

• Winding

• Pre-wrapping

• Wet lay-up on mandrels

• Polymer concrete

• High abrasion molding

Process

• TM 112 can be spray or wipe applied, although the wipe method is most effective.

• When wiping on the material, saturate a clean, cotton cloth with TM 112 and apply to the mandrel.

• Initially, 2 to 3 even coats should be applied to ensure proper coverage, with a few minutes of dry time between each coat.

• Do not heat cure TM 112 prior to molding.

• After de-molding the part, re-apply TM 112 as required (typically one coat).

Request
Callback

 

Additional Information

• Item CodeTM-112

 

 

Additional Information:

• Delivery Time: 2-7 days
• Packaging Details: 5,10,20,30,210 Litres

Product Details:

Importer of a wide range of Mold Release Agents including entire range of Dexkote 7 X semi permanent mold release agent, G-161 X and G -172 internal release agents, TM 112 Mold Release Agent and allied products for rubber industry, TM 128PP Mold Release Agent for composites and so many other products as per requirements.

Specification:

• Type: Solvent or water based release agent.
• Purity: 99.9%
• Multi release/ Semi permanent
• No build up on the moulds
• Temperature Stability of 850 F / 450 C

Product Details:

 

Additional Information:

• Delivery Time: 2-7 DAYS

Product Details:

Aquacoat SR-41 BD1 is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.Aquacoat SR-41 BD1 is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C. Best for, all kind of rubber-types and rubber moulding except silicone rubber, and Rotational Molding.Aquacoat SR-41 BD1 adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.Aquacoat SR-41 BD1 reduces build-up on moulds when applied according to instructions.

Additional Information:

• Item Code: 39100090
• Production Capacity: AS PER ORDER
• Delivery Time: 2-7 DAYS
• Packaging Details: 5,10,20,30,35 LITRES PLASTIC CANS